Table of Contents
Advertisement
LAN Connector LEDs
Two LAN ports (connectors) located in the back have two LEDs each.
• 100/10 LED (LAN connector 2), 1000/100/10 LED (LAN connector 1)
These LEDs show the transfer rate of the network that is being connected.
LED indications
Amber
Operating as 1000BASE-T.
Off
Operating as 100BASE-TX or
10BASE-T.
• LINK/ACT LED
The LINK/ACT LED shows the status of a standard network port. It is green if power is
supplied to the main unit and hub, and they are connected correctly ("LINK"). It blinks green
while the network port sends or receives data (ACT).
When the LED does not illuminate during "LINK," check the condition and connection of
network cables. If there is nothing wrong with the cables, a defect is suspected in the network
(LAN) controller. In this case, contact your sales agent.
LAN connector 1
1000/100/10
LAN connector 2
100/10
Operating as 100BASE-TX.
Operating as 10BASE-T.
2-27
Advertisement
Table of Contents
