Ln03 Plus Commands (Optional Emulation Required); Cals Commands (Optional Emulation Required); Tiff Commands (Optional Emulation Required); Menu Chart Conventions - MINOLTA-QMS MAGICOLOR 6110 User Manual

LN03 Plus Commands (Optional Emulation Required)

Identify product
Control line wrap
Specify default paper size
Control transformation point
Adjust image horizontally
Adjust image vertically
Set power-up configuration

CALS Commands (Optional Emulation Required)

Automatic rotation of image
Automatic scaling of image

TIFF Commands (Optional Emulation Required)

Automatic rotation of image
Up or down scaling of image
Automatic selection of paper size
Annotation
Reverse image control
Control disk scratchfile size
Set annotation tag number

Menu Chart Conventions

The following conventions are used in the menu charts:
„
Some menu choices are marked as optional, indicating that the selection
appears in the menu only when the option is installed.
„
These charts show only the top-level menus. Refer to the CrownBook for
detailed information on menu options.
„
Defaults are shown in bold face.
198
%%IncludeFeature: product
%%IncludeFeature: autowrap
%%IncludeFeature:
paper_size
%%IncludeFeature:
paper_size_override
%%IncludeFeature: xorigin
%%IncludeFeature: yorigin
%%IncludeFeature:
reset_override
%%IncludeFeature: autorotation
%%IncludeFeature: autoscaling
%%IncludeFeature: autorotation
%%IncludeFeature: autoscaling
%%IncludeFeature: sheetsel
%%IncludeFeature: annotation
%%IncludeFeature: reverse
%%IncludeFeature: scratchfile
%%IncludeFeature: tag
Menu Chart Conventions