Table of Contents
Advertisement
WARNING!
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor. Material Safety Data Sheets (MSDS) information
can be found at www.minolta-qms.com (click on the Answer Base).
ACHTUNG! Sollte Toner in Ihre Augen gelangen, die Augen unbedingt
sofort mit kaltem Wasser ausspülen und einen Artzt aufsuchen.
MSDS-Informationen (Material Safety Data Sheets; Datenblätter ur
Materialsicherheit) finden Sie im Internet unter www.minolta-qms.com
(klicken Sie auf "Answer Base").
If, after clearing the media jam, the jam message in the control panel window
persists, open and close the printer's covers. This should clear the jam
message.
Handling Media Jams by Location
Location of Jam
Tray 1—upper tray
Tray 2 or 3—optional tray(s) (lower feeder unit)
Near OPC belt
Near duplex unit
Near fuser unit
Misfeed Jams
1
Remove the media tray(s).
2
Pull out the jammed media.
3
Shuffle the media currently in the tray(s) and even up the front edges.
4
Ensure that the media is lying flat in the tray(s).
5
Reinsert the media printing face up.
Attention
Make sure the media doesn't exceed the media limit mark. Check to
see if the media width guides are correct.
6
Slide the tray(s) back into the printer.
7
Open the front cover, then close it.
The media jam display is cancelled.
Clearing Media Jams
Page Reference
page 75
page 76
page 79
page 76
75
Advertisement
Table of Contents
