Repack the Printer
If you need replacement packaging, in the United States, call MINOLTA-QMS
Spares at (251) 633-4300 extension 2530 and request catalog number
2600439-500. In locations outside the United States, refer to the Service &
Support Guide or www.minolta-qms.com.
Before packing the printer and strapping it to a pallet, verify that the actions
described in the following list have been completed in this order.
Checklist
9
Item
RMA number
Repacking kit, pallet, strap-
ping and buckling supplies
OPC belt cartridge
Cables
Media tray(s)
Toner cartridges
Fuser oil bottle
Cleaning roller
Fuser tension release levers
Waste toner bottle
Duplex unit
Lower feeder unit(s)
Printer
174
Should
Additional actions
be...
Received
Before shipping, place the
RMA number prominently
on the outside of the box.
Acquired, if
necessary
Installed
Removed
Removed
Removed
Removed
Fuser oil remover syringe
used to remove the oil, and
paper towels inserted to
absorb any residual oil
Removed
In forward
position
Replaced
New waste toner bottle
installed
Removed
Removed
Bagged
Repack the Printer