Table of Contents
Advertisement
Toner
Warm-up time
Input sources
Output
Controller
CPU
Resident
emulations
Optional
emulations
Engine and Controller Specifications
Type: Microfine, dry, single component
Packaging: User-replaceable toner cartridges
Keyed toner cartridges are available from your local ven-
dor. Refer to the Service & Support Guide or
www.minolta-qms.com for information.
Maximum: 210 seconds
Typical: 180 seconds from power on, assuming normal
temperature and humidity
Standard: 250-sheet universal tray
Optional: up to two 500-sheet lower feeder unit trays
250-sheet letter/A4 tray
250-sheet output tray on top of printer
IDT RC64474, operating at 200 MHz
PostScript—Level 3 (600/1200 dpi)
HP PCL—PCL5c, PCL XL, PCL5e/GL2 (HP PaintJet
XL300 compatible, PCL 6; 300/600 dpi; 300/600/1200 dpi,
GL2 only)
5 "
You can use any of the Hewlett-Packard series of
drivers with this printer; however, we recommend
the LaserJet 4P or DeskJet 1200C for monochrome,
or the DeskJet 1200C for color. You can download
Hewlett-Packard drivers from the Hewlett-Packard
website at www.hp.com. We recommend that if you
print using a Hewlett-Packard printer driver, you
disable PJL commands within the driver settings.
PDF—Version 1.2
HP-GL—7475A/7550/Draftmaster (300/600 dpi)
Lineprinter—(600 dpi)
ImageServer (monochrome only)
CGM
LN03 Plus (300 dpi monochrome only)
187
Advertisement
Table of Contents
