Table of Contents
Advertisement
Noise-generating
Equipment
Recommended Fre-
quency
Grounding
Power
Voltage
Fluctuation
Rate
Frequency
Variation Rate
Location Requirements
„ On a hard, flat, level (1.5° or less slant at any point around the
machine) surface capable of supporting the printer, accessories, con-
sumables, and media. Weights are shown below.
Component
Printer
Consumables (such as toner,
OPC belt)
Media
Lower feeder unit (each)
Duplex unit
5 "
182
Should not be connected to the same electrical outlet
as the printer.
60 Hz ±2 Hz for a 120 V system, and 50 Hz ±2 Hz for
a 220–240 V system.
Your printer requires a properly grounded AC outlet.
Japan
North America 120 VAC 50–60 Hz 11 amps
Europe
Latin America
Japan
North America 120 VAC ±10%
Europe
Latin America
Within 50–60 ±3 Hz
A surface can be tested for levelness with a standard round pencil.
If the pencil rolls, the surface is not level. Clear the area of any
obstruction or items such as cables that might prevent the printer
from sitting directly on the flat, level surface.
100 VAC 50–60 Hz 13 amps
220–240 VAC 50–60 Hz 6 amps
120 VAC 50–60 Hz 11 amps
220–240 VAC 50–60 Hz 6 amps
100 VAC ±10%
220–240 VAC ±10%
120 VAC ±10%
220–240 VAC ±10%
Weight
101 lbs (46 kg)
11 lbs (5.0 kg) (total)
5.2 lbs (1.9 kg) per ream of 20 lb
bond (75 g/m
14.8 lbs (6.7 kg)
5.3 lbs (2.4 kg)
2
) paper
Requirements
Advertisement
Table of Contents
