Table of Contents
Advertisement
After the Kanji hard disk is installed in your magicolor 6110, the Kanji fonts
are available for use just as if they were resident on the printer.
What's in the Kit?
„
Internal IDE hard disk drive preformatted with the following two Kanji
Morisawa fonts:
„
IDE hard disk with ribbon cable attached
„
IDE hard disk bracket
„
4 screws
Hardware Requirements
„
A Macintosh, IBM PC, or compatible computer
Software Requirements
„
An application (such as a word processing or desktop publishing pack-
age) that supports PostScript printing.
„
If you're using a Macintosh, the following Macintosh system software:
z KanjiTalk, version J1-6.0.7 or later
z System File, version J1-6.0.7 or later
z Laser Prep, version J1-6.0.1 or later
z LaserWriter, version J1-6.0.2 or later
z Print Monitor, version J1-1.3 or later
z MultiFinder, version J1-6.1.7 or later
z Macintosh OS 8.xJ
„
If you're using a PC, the following system software:
z If you're using Windows, version 3.1J or later
z If you're using DOS, version 5.0J or later
Installing a Kanji Font Internal IDE Hard Disk Drive
Attention
The Kanji fonts are factory installed on a formatted hard disk drive. DO
NOT reformat or initialize the Kanji internal IDE hard disk drive.
Reformatting erases all data, fonts, and files on the disk. Your warranty
does not cover this error.
Emulations, Fonts, and Other Software
Ryumin and GothicBBB.
131
Advertisement
Table of Contents
