Mechanical Protective Devices; Electric Safety Devices; Aerial Noise; Vibrations - Rancilio classe 8 Use And Maintenance

Hide thumbs Also See for classe 8:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 54

2.3. Mechanical protective devices

The machine is equipped with the following protective
devices:
● complete panelling protection of all the parts
subject to heat and of the steam and hot water
supplier;
● cup-warmer plate supplied with a tray to collect
spilt liquids;
● work surface provided with grill and tray to collect
spilt liquids;
● expansion valve in the hydraulic system and valve
on the boiler to avoid overpressure;
● nonreturn valve on the hydraulic system to avoid
flowing back to the main supply.

3. TECHNICAL DATA

3.1. Dimensions and weights (Fig.4)
A mm
A1* mm
B mm
C mm
D mm
H mm
Boiler capacity in litr.
Machine weight kg
Water inlet
Ø mm drainage
Packaging
Volume m
3
Dimensions L x P x H mm
Gross weight kg
*A1 (reduced overall dimensions with side case assembly)
You'll find all the technical data on electric
connection, on the machine identification
label Fig. 1.

4. USE

The machine have been designed, manufactured and
protected to be used to make express coffee and hot
beverages (tea, cappuccino, etc.). Any other use is to
be considered unsuitable and therefore dangerous.
The manufacturer cannot be held respon-
sible for any damage caused to people
or things due to unsuitable, erroneous or
irrational use of the machine.

2.4. Electric safety devices

The safety devices provided are:
● 12V low tension push buttons an the DE control
● thermal protection on the pump motor;
● safe resistance thermal;
● Electronic safety devices.

2.5. Aerial noise

Noise level in the working place does not usually
exceed 70dB(A).

2.6. Vibrations

The machine is supplied with rubber vibration dam-
ping feet. In normal working conditions, the machine
does not produce vibrations harmful to the operator
and the environment.
1 GROUP
2 GROUP
690
570
505
500
300
490
5
53
3/8"
14
0.27
660x670x600
910x670x720
63
The operator must always follow the indications con-
tained in this manual. In the case of a failure or if the
machine is not working properly, switch it off and do
not attempt any direct repair. Refer exclusively to a
service centre.
key panel;
3 GROUP
850
1090
730
970
665
905
500
500
300
300
490
490
11
16
76
94
3/8"
3/8"
14
14
0.44
0,55
1150x670x720
76
90
4 GROUP
1330
1210
1145
500
300
490
22
112
3/8"
14
0.67
1390x670x720
108
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents