Name, Date, Time, And Language - Buffalo TeraStation TS4800D User Manual

3
Click Install Update.
You can also download the firmware from www.buffalotech.com.
Note: Settings is not available while the firmware is updating. Don't try to access Settings from another computer
until the update is complete.

Name, Date, Time, and Language

Configure the TeraStation's hostname, date, time, and language as follows.
Note: If the TeraStation is being used as an iSCSI hard drive, to change the settings, navigate to Drives - iSCSI in
Settings and set the icon to
1
In Settings, click Management.
2
Open Name/Time/Language.
3
Click Edit.
4
Click the Name tab, then configure the TeraStation's name and description.
5
Click the Time tab.
Click Use Local Date/Time to use your computer's time settings for the TeraStation.
By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs to
Internet Multi Feed Inc. For more information, visit www.jst.mfeed.ad.jp.
To use a different NTP server, select Name/Time/Language from Management. Click Time, then Edit. Uncheck "Use
Default NTP Server" and enter a new NTP IP address. Click OK.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
TeraStation.
.
131