Changing Raid Mode - Buffalo TeraStation TS4800D User Manual

3
Click Delete RAID Array.
Once JBOD mode is configured, create shared folders on each drive to use them.

Changing RAID Mode

To change the RAID mode, first put the drives in JBOD.
1
Select RAID.
2
Click the array to delete.
Note: If the "RAID Mode" field is blank, the array is already in JBOD. Proceed to step 7.
3
Click Delete RAID Array.
4
The "Confirm Operation" screen will open. Enter the displayed number, then click OK.
5
Click OK.
6
Choose the array to configure.
7
Select a RAID mode and the drives to be used, then click Create RAID Array.
36