Accessing From A Nfs Client - Buffalo TeraStation TS4800D User Manual

shared folders can be created under the DFS root.
4
Enter DFS Root Folder Name.
5
Click Add Link.
6
Enter the link name, hostname, and shared folder name, then click OK.
Notes:
• TeraStations, LinkStations, and SMB-compatible Windows computers can be specified as DFS link targets (Mac OS
and Linux are not supported).
• If "Set DFS Link to DFS Root" is disabled, you may create up to 8 hostnames and DFS links.
7
Click OK.
8
Move the DFS switch to the

Accessing from a NFS Client

Note: (US purchasers only) Buffalo's customer support will help configure the NFS settings on your TeraStation, and
will support VMware and Windows clients but will not provide support for configuring your Linux or other UNIX
clients. There are many types of UNIX and the procedures for configuring NFS with them will vary considerably.
For help configuring your NetWare, Linux, or other UNIX clients for NFS support please consult each client's own
documentation and support.
1
Open Folder Setup.
position to enable DFS.
119