Default Settings; Specifications - Buffalo TeraStation TS4800D User Manual

Recovery I55
RecoveryAuthFail

Default Settings

Administrator's Name
Password
DHCP Client
Registered Group
Microsoft Network Group Setting
Ethernet Frame Size
SMB2
AFP
FTP
NTP
Print Server
WebAccess
Time Machine
TeraSearch

Specifications

Check www.buffalotech.com for information about the latest products and specifications.
Authentication during recovery of
settings failed.
admin
password
Normally, the TeraStation will get its IP address automatically from a DHCP
server on the network.
If no DHCP server is available, then an IP address will be assigned as follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the
TeraStation.)
Subnet Mask: 255.255.0.0
"hdusers", "admin", and "guest"
You cannot edit or delete them.
WORKGROUP
1518 bytes (Including 14 bytes of the header and 4 bytes of FCS)
Enabled
Enabled
Disabled
Enabled
Enabled
Disabled
Disabled
Disabled
Settings can only be restored for the TeraStation
whose settings were originally saved. To restore
settings, insert the USB memory device, move the
Boot Mode switch on the rear of the TeraStation
to the USB position, and restart the TeraStation.
Or, settings can be restored from Settings with the
TeraStation powered on.
147