Buffalo TeraStation TS4800D User Manual page 55

3
Select the TeraStation from the Target product list, then click Register iSCSI Device.
Note: If access restrictions are configured, enter your username and password.
4
Select the volume to be connected and click Connect.
The connected volume is added as a local drive in Computer (or My Computer). Repeat these steps on each computer to
connect multiple volumes.
Note: If using Windows XP or Windows 2000, use LVM to create volumes that are 2 TB or smaller.
Mutual Authentication in the TeraStation
The TeraStation can perform mutual authentication. Dual passwords ensure that only authorized client computers
can access the volume on the TeraStation. To configure mutual authentication, see "Registering the TeraStation and
Connecting the Volumes".
Mutual Authentication Password Setup for the TeraStation (System)
In Settings, navigate to Drives - iSCSI - Security - Access Restrictions for Entire System - Edit - Access Restrictions, then click
Mutual Authentication and set the password (mutual authentication).
Mutual Authentication Password Setup for Individual Volumes
In Settings, navigate to Drives - iSCSI - Create Volume or Delete Volume - Access Restrictions, then click Mutual
Authentication, and set the password. The password that is set here is used when connecting to the volume. The volume
is connected when this password matches the mutual authentication password that was set at the computer.
55