Hard Drive Replacement - Buffalo TeraStation TS4800D User Manual

Mutual Authentication Access Restrictions by Username and Password
To set access restrictions using mutual authentication in addition to regular access restrictions, configure the settings as
shown below.
• In the screen above, check "Mutual Authentication" and enter the password in the "Mutual Authentication Password"
field.
• In the "User Authorization" screen displayed when the TeraStation is connected, select "Enable Mutual
Authentication".
• The entry screen for the mutual authentication password is displayed again. Enter the password that was set.
• If using the iSCSI Initiator included with Windows 8, Windows 7, Windows Vista, or Windows Server 2008, set the
CHAP login information performing searches and connections for targets.
Mutual Authentication Access Restrictions by IP Address
To set access restrictions by IP address, configure the settings as shown below.
Enable "IP Address Restrictions" in the screen above, enter the IP address where access is allowed in "IP Address List", and
click OK.

Hard Drive Replacement

Hard drives in the TeraStation show a blue status LED during normal operation. When a drive fails, its error LED will glow
red.
1. Error LED
Glows red if a drive has failed.
60