Chapter 10 Utilities
NAS Navigator2 for Windows
NAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation's IP address, or check
its hard drive. If you installed the TeraStation with the TeraNavigator CD, NAS Navigator2 was installed automatically.
To launch NAS Navigator2, double-click the
Click your TeraStation's icon to open a share on the TeraStation and display:
•
Total capacity
•
Capacity in use
•
IP address
•
Workgroup
•
Subnet mask
•
Default gateway
•
MAC address
•
Firmware version
Name
Menu
Map Share
*
Disconnect Share
*
Map All Remote Shares to
Drive Letters
Create Desktop Shortcut
Launch NAS Navigator2
on Startup
Display Errors
Properties
*
Close
icon.
Description
Assigns the TeraStation's shared folder as a network drive.
Unmaps the network drive.
Assigns all the TeraStation's shared folders as network
drives.
Creates a shortcut to the TeraStation's shared folder
*
(share).
Launches NAS Navigator2 in the system tray when
Windows boots.
If an error occurs, an error message will pop up from the
NAS Navigator2 icon in the system tray.
Opens the selected TeraStation's properties page.
Closes NAS Navigator2.
136