Buffalo TeraStation TS4800D User Manual page 120

2
Choose the shared folder that will be accessible to the NFS client.
3
Click Edit.
4
Under "LAN Protocol Support", enable "NFS". Click OK.
Note the NFS path. It will be used later for accessing data from an NFS client.
5
Click Close.
6
Move the NFS switch to the
7
Click the icon to the right of "NFS".
8
Click Client Settings.
9
Click Add Client.
10
Enter the IP address and hostname of the NFS client, then click OK.
To delete the client, check the hostname and click Delete Client.
11
Click Close.
12
Enter the mount command to access the shared folder from the NFS client.
position to enable NFS.
120