Applying Settings - Buffalo TeraStation TS4800D User Manual

3
Click to the right of "Restore/Erase".
4
From "Target USB drive", select the USB memory device that is connected to the USB 2.0 port of the TeraStation.
5
Select "Save current configuration to a USB drive", then click Execute.
Troubleshooting:
If the settings are not saved to the USB memory device successfully, you may receive the error message "The specified
operation cannot be executed. " . Verify:
• The device is connected to a USB 2.0 port, not a USB 3.0 port.
• The device has a capacity of 1 GB or larger.
• The device is not write-protected.

Applying Settings

The saved settings can be applied to a different TeraStation.
1
Connect the USB memory device with the saved settings to a USB 2.0 port of the TeraStation (not a USB 3.0 port).
2
In Settings, click Management.
3
Click to the right of "Restore/Erase".
4
From "Target USB drive", select the USB memory device that is connected to the USB 2.0 port of the TeraStation.
126