Buffalo TeraStation TS4800D User Manual page 73

7
Click Add under "Backup Target".
8
Select the shared folder that will be the replication target, then click OK.
9
Click OK.
10
Click Yes.
Notes:
• A maximum of 64 shared folders can be configured for replication.
• Shared folders with a backup password set cannot be selected as replication targets.
• Replication source data is copied using a differential overwrite to the replication target folder. Note that any data
that is not in the replication source will be overwritten.
• Replication can also be used to copy all data from a share to a share on an attached external drive. Format the
drive with ext3 or XFS before using for replication. Drives with FAT32 partitions are not supported with replica-
tion.
• You can select subfolders as the replication source. Folders whose names contain more than 80 alphanumeric
characters cannot be selected.
• If a "Replication I33 ReplicateFailure" error occurs, navigate to Backup - Replication and click Run Differential Resync
instead of Run Complete Resync. "Run Complete Resync" will overwrite all data to the replication target folder but
73