Using Normal Mode; Changing Raid Mode - Buffalo TeraStation TS5800D User Manual

Using Normal Mode

In "normal mode", each hard drive in the TeraStation is addressed separately as an individual drive. To break an array into
individual drives, follow the procedure below.
1
In the TeraStation's Web Admin interface, click [Drives].
2
Click next to [RAID].
3
Select the array you want to delete.
4
Click [Delete RAID Array].
5
Follow the instructions on the screen.
Notes:
• While RAID settings are being changed, the message "RAID ARRAY x Creating" is displayed on the LCD panel.
• The "Confirm Operation" screen will open. Enter the displayed number, then click [OK].
Normal mode is now confi gured. Create a shared folder before use.

Changing RAID Mode

Before changing to a diff erent RAID mode, fi rst put the drives in normal mode.
1
In the TeraStation's Web Admin interface, click [Drives].
2
Click next to [RAID].
41