Tecnico cb250 Manual page 73

6. Engine Removalñnstallatlon
i
'-
Service Information
Service Information
6-1
Engine Removalllnstallation
6-2
I
\
!
\....
L
.' A floor jack orother adjustable .support is required tosupport and maneuver the engine .
• . When removinq/installinqthe enqine. tapé the frame around the engine beforehand for frame protection.
During engine removal/instaHation, be careful not to damage the 'wire harnesses or cables by pinching them between the
engine and frame.
The following components can be serviced with the engine installedin 'the-frame.
- üil pump (Section 4) . .
- Camshaft (Section 7)
- Clutéh/gearshift linkage(Section 8)
- Alternator (Section 13)
- Starter clutch (Section 15)
• The followinq components require engine removal for service.
- Cylinder head/cylinder/piston (Section 7)
- Transmissionlshift forks/shiftdrum (Section 9)
- Crankshaft [Section 9)
6-1
I
' -
l