Advertisement
Brake System
Brake Pad Replacement
C 1 8 (1.8,13)
(2)
(t
3 (0.3, 2.2)
(1 )
•
A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and c1ean a contaminated disc
with a high quality brake degreasing agent.
•
Inhaled asbestos fibers have been found to cause respiratory diseaseand cáncer. Never use an air hose or dry brush to
c1ean brake assemblies.
After replacernent, operate the .hrakeIever to seat the caliper pistons against the pads.
-NOTE
The brake pads can be replaced without disconnectíng the hydraulic system.
Replace the brake pads as a seto
Apply a thin coat of grease onto the pad pin and pad pin plug threads so as not to rust it.
Procedure
Q'ty
Remarks
Removal Order
Installation is in the reverse order of removal.
(1 )
Pad pin plug
1
(2)
Pad pin
1
(3)
Pad
2
NOTE
.-
• Push the pistons all the way in to provide clearance for
new pads .
• Before installing the pads; make sure that the pad spring
. .
ispositioned properlv as shown.·
12-3
L
L
'--
L
L
l
Advertisement
