Advertisement
CBZ50 Addendum
Unstake the lock nut.
Clutch Center Lock Nut Removal
Attach the clutch center holder with the lifter plate bo!ts.
Loosen the lock nut whíle holding the clutch center as
shown.
(1) L1FTEH PLATE BOLTS
07GMB - KT70100
07716 - 0020100
07716 - 0020500
Clutch center holder
Lock nut wrench, 20 x 24 mm
Extension bar
(3) LOCK NUT WRENCH
(2)
CLUTCH CENTER
HOLDER
Torque: 74 N·m (7.6 kqf-m. 55 Ib-ft)
Clutch Center Lock Nut Installation
Apply engine oil to the clutch center lock nut threads.
Attach the clutch center holder wíth the lifter plate bolts.
Tighten the clutch center lock nut whíle holding the clutch
center as sh own.
(2)
LOCK NUT WRENCH
(3) EXTENSION BAR
07GMB - KT70100
07716 - 0020100
07716 - 0020500
Clutch center holder
Lock nut wrench, 20 x 24 mm
Extension bar
Stake the lock nut.
Primary And Gil Purnp Orive Gears Removal
(1) GEARHOLDER
Insert the gear holder as shown.
Remove the prímary drive gear nut and lock washer.
Remove the clutch assembly (page 19-22).
Rernove the oíl pump drive gear and primary drívegear.
07724 - 0010100
Gear holder
Torque: 53 N-m (5.4 kgf'm,39 lb-ftl
Primary And Oil Pump Drive Gears Installation
Install the oil pump drive gear and primary drive gear onto
crankshaft.
Install the clutch assembly (page
19~22).
Insta/l the lock washer with the "OUT SIDE" mark facing out.
(2)GEAR HOLDER
\
07724-0010100
Gear holder
Insert the gear holder as shown.
Tighten primary drive gear nut.
19-24
Advertisement
