Download Print this page

Tecnico cb250 Manual page 52

Advertisement

2. Frame/Body Panels/Exhaust System
Service Information
Troubleshooting
Exhaust System Removalllnstallation
Service Information
2-1
2-1
2-2
Seat Removalllnstallation
Rear Faiririq Removalllnstallation
Fuel
Tank Removal/lnstallation
2-3
2-3
2-4
GasoHne is extremely flammable and isexplosive under certain conditions. _
Serious burns may result if theexhaust system is not allowedto cool before components are removed or serviced.
Work in a wel! ventilated area. Smoking or allowing flames or sparks in the work area or wheregasoline is stored can cause
a fire or explosion.
This section covers rernoval and installation of the frame bodv panels, fuel tank and exhaust system.
Always replace the exhaust pipe gaskets when removingthe exhaust pipe from the engine.
Wheninstalling the exhaust pipe, first install al! the fasteners loosely. Next, tiqhten the exhaust clamps. Then tighten the
mounting fasteners. If you tighten the mounting fasteners first, .the exhaust pipe may not seat properly.
Always inspect the exhaust system for leaksafter installation.
Troubleshooting
Excessive Exhaust Noise
Broken exhaust system
Exhaust gas leak
Poor Performance
Deformed exhaust system
Exhaust gas leak
Clogged muffler
JIt-
/-1

Advertisement

loading