Advertisement
Front Wheel/Suspepsion/Steering
Tighten the bearing adjustment nut.
Hold the steering stern in the place and install the upper inner
race and bearing adjustment nut,
Insert the steering stern, taking care not to dislodge the bear-
ings from the grease.
ls.~ol)
(2) STEERING
STEM NUT
WRENCH
(1) UPPER INNER RACE
07916-3710100
Steering Stem Installation
Apply grease to the upper and lower races. Install the bear-
ings onto the upper and lower races making sure you have
the correct amount.
,
S.~Ol)
Steering stem nut wrench
Torque:
18
N·m
(1.8
kq-rn,
13
ft-lb)
Move the steering stem right and left, Iock-to-lock, five times
to seat the bearings.
Make sure that the steering stemmoves smoothly, without
plavor binding; tberrloosen the bearinq adjustrnent nut.
(1) STEERING STEM
Retighten the bearing 'adjustment out to the specified torque.
Torque: 3 N-m
(0.3
kg-m, 2.2 ft-Ib)
Recheck that the steering stem moves smoothly without play
or binding.
1
S.~Ol)
k-_--~(1)
STEER/NG
STEM NUT
WRENCH
10-18
Advertisement
