Advertisement
Carburetor Heater
Carburetor Heater Inspection
Remove the fuel tank (page 2-4).
Disconnect the carburetor heater 2P connector.
Measure the resistance between the Brown/Black and
Yellow/Brown terminals.
00
CB250 Addendum
If the carburetor heater resistance is out of specification,
remove the carburetor (page 19-17) and replace the carbu-
retor heater.
(1)
COLLAR
(2) CARBURETORHEATER .
'-
I
'-
L
Check the voltage between the Brown/Blue and Green ter-
minals with the ignition switchis ON.
There should be battery voltage.
(1) CONNECTOR
19-21
Advertisement
