Advertisement
5.
FuelSvstem
Service Information
Troubleshooting
Carburetor Removal/lnstallation
Service Information
5-1
5-2
5-3
Carburetor Disassembly/Assembly
Air Cleaner Case Removal/lrtstallation
Pilot Screw Adjustment
5-4
5-6
5-7
Gasoline is extremely flammable and is explosive undercertain conditions.
Bending or twisting the control cables will impair smooth operation and could cause the cables to stick or bind,resulting
in Ioss of vehicle control.
•
Work in a well ventilated area. Smoking or allowing flames or sparks in the work area or where gasoline is stored can cause
a fire or explosion.
CAUTION
Be sure to rernove the diaphragms before c1eaning air and fuel passages with compressed airo The diaphragms might be
damaged.
Refer to sectíon 2 for fuel tank removal and installation.
When disassembling fuel system parts, note the locations of the O-rings. Replace them with new ones on reassembly.
Before removing the carburetor, place an approved gasoline container under thecarburetor drain tube, loosen the drain bolt
and drain thecarburetor.
.
.
After removing the carburetor, wrap the intake port of the engine with a shop towel or cover it with pieces of tape to pre-
vent 'any foreign material from droppinginto the engine.
NOTE
If the vehicle is 10 be stored for more than one month, drain the float bowl. Fuelleft in the float bowl may cause cloqqed
jets resulting inhard starting or poor drive abilitv.
Fi-1
Advertisement
