Advertisement
,
11 . Rear Wheel/Suspension
Service Information
Troubleshooting
Rear Wheel Removal/lnstallation
Rear Wheel Disassembly/Assembly .
11-1
11-1
11-2
11-4
Shock Absorber Removalllnstallation
Swingarm Removal/lnstallation
Swingarm Disassembly/Assembly
11-6
11-7
11-8
.Service Information
'-
•
A contaminated brake drum or shoe reduces stopping power. Discard contaminated shoes and clean a contaminated
'--
drurn with a high quality brake degreasing agent.
•
Inhaled asbestos fibers have been found to cause respiratory disease and cancer. Never use an air hose or dry brush to
e1ean brake assernblies.
Keep grease off the brake shoes and drums.
•
For rear wheel, shock absorber or swingarm removal, a hoist or othersupport is required to support the motorcycle.
Tubeless tire removal, repair, and remounting proeedures are coveredinthe seetion 16 of the Common Service Manual.
When remounting the tire, note the normal rotating direetion.
Refer to the section 12 for brake system information.
Troubleshooting
Soft Suspension
Weak spring
Oil leakage from damper unit
Incorreet suspension adjustment
Low tire pressure
Hard Suspensión
Incorrectly suspension adjustment
Bent swingarm pivot
Damaged swingarm pivot bushings
Bent damper rod
High tire pressure
.,
..
~.
Steers To One Side Or Does Not Track Straight
Bent rear axle
•
Axle alignment/ehainadjustmentnot equal on both
sides
Rear Wheel Wobbling
•
Bent rirn
•
Worn rear wheel bearings
Faulty tire
Unbalanced tire and wheel
Low tire pressure
.' Faultv swingarm pívot bushinqs
11-1
'-
Advertisement
