Advertisement
Air Cleaner
Remove the rear fairing (page 2-3).
Remove the air cleaner case cover.
Disconnect the tube.
Pull the air cleaner element set plate and remove the elernerrt.
Discard the air c1eaner element in accordance with the main-
tenance schedule.
Install the air cleaner element by compressing the set spring
as shown.
Connect the tube.
Install the removed parts in the reverse order of removal.
Maintenance
(1
l
AIR CLEANER CASE COVER
(1l
SET PLATE
(2)
TUBE
Valve Clearance
NOTE
Inspect or adjust the valve clearance while the engine
is cold (below 35°C/95°F).
.
Remove the cylinder head cover (page 7-2l.
Remove the crankshaft andtiming holecap.
Turn the crankshaft counterclockwise and align the "T" mark
with the index mark of the left crankcase cover.
\
(2)
''1''
MARK
(1)
INDEX MARK
3-5
Advertisement
