Advertisement
SymboIs
The svrnbols used throughout this manual show specific service procedures. If supplementary information is required pertain-
ing to these symbols, it would be explained specifically in the text without the use of the symbols.
~
Replace the
partís] with new one(s) befo re assembly.
e
I
s.~oll
Use special tool.
IO.P~OOll
Use optional tool. These tools are obtained as you order parts.
e
Torque specification: 10 N-m (1..0 kg-m, 7 ft-lb)
10 (1.0, 7)
~,
Use recommeñded engine oil, unless otherwíse specified.
,
Use molybdenum oil solution
(mixture of the engine oil and molybdenum grease with theratio 1
1) .
~
Usemulti-purpose grease (Lithium based multi-purpose grease NLGI #2 or equivalervt).
..
~
.
T.
~
Use molybdenum disulfide grease (containing more than 3% molybdenum disulfide, NLGI #2 or
equivalent).
Example: Molykote®
BR-2 plus manufactured by Dow Corning, U.S.A.
Multi·purpose M-2 manufactured by Mitsubishi Oil Japan
Use molybdenum disulfide paste (corrtaininq more than 40% molybdenum disulfide, NLGI #20r
equivalent) .
~
Example: Molykote'" G-n Paste. manufactured by Dow Corning, U.S.A.
Honda Moly 45 (U.S.A. only)
Rocol ASP manufactured by Rocol Limited, U.K.·
Rocol Paste manufactured by Surnico l.ubricant, Japan
~
Use silicone grease.
A
CS'
Apply alocking agent. Use the agent of the middle strength, unless otherwise specified .
.(I~
Apply sealant.
I
Use brake fluid, DOT 3 or DOT 4. Use the recommended brake fluid, unless otherwise specified.
--
Use Fork or Suspensión Fluid.
Advertisement
