Battery; Main Characteristics; Installing The Battery - Ingenico iWL2 Series User Manual

4.5. Battery
4.5.1.
Main characteristics
Characteristics
Capacity
Charge
Autonomy*
* depend on the terminal type and its base.
4.5.2.
Installing the battery
WARNING
Switch off the terminal prior to connecting the battery.
•
Turn your terminal and unclip the battery trapdoor by
pushing on the clips with your nails as shown on the
picture
•
Disengage the trapdoor
•
Take the battery pack included in the box
•
Locate the battery pack connector beside the battery
compartment
•
Plug the battery pack connector according to the
connector locating system and the red wire (as
shown on picture).
Verify that it locks.
•
Place the battery pack in its compartment.
•
Check that the wires' path is flat
•
Close the battery compartment trapdoor.
iWL2xx Wireless Series •
900003061 R11 000 04/1050
Li‐ion
2050mAh
50% capacity in 1.5h; full capacity
in 4hours
500 typical transactions
up to 250h in stand by
15/28
Red wire
Battery compartment
Copyright © 2011 Ingenico
All rights reserved