Installation; Recommendations; Terminal Connections - Ingenico iWL2 Series User Manual

4.

Installation

4.1. Recommendations
Location of the iWL2xx
Place the base on flat surface near an electric socket and, if modem option, a telephone
socket. The terminal should be placed far from any very hot zones, protected from
vibrations, dust, damp and electromagnetic radiation (computer screen, anti‐theft barrier
etc.).
The terminal must not be fixed to a counter in such a way that a user cannot pick up the
terminal and use his/her body to conceal the PIN when it is requested.
Operating conditions
Ambiant temperature
Max relative humidity
Storage conditions
Ambient temperature
Max relative humidity
4.2. Terminal connections
•
There is an USB connector (microAB) on the left side of the iWL2XX Wireless
terminal (see below picture). This connector manages Host or Slave connexions.
*MicroAB connector durability : up to 10000 mating cycles
•
The terminal supports USB Keys with FAT16 or FAT32
•
The USB Key has to be used with an USB adapter (refers to accessories section)
iWL2xx Wireless Series •
900003061 R11 000 04/1050
from +5°C to +45°C
85% at +40°C
from ‐20°C to +55°C
85% at +55°C
10/28
Copyright © 2011 Ingenico
All rights reserved
USB (microAB)
Connector used for PC,
travel charger adapter, USB
Key, etc...)