IKEA FIXA Original Instructions Manual page 6

Service Charging the screwdriver
a. Have your power tool serviced by a Battery charging (Pic.2)
qualified repair person using only identical Under normal usage the screwdriver can be
replacements parts. recharged several hundred times. To keep the
This will ensure that the safety of the power tool screwdriver in prime condition, charge at least
is maintained. once every six months.
Note: During charging the battery will become
-This appliance is not intended for use by warm as it is being charged.
persons (including children) with reduced The battery supplied with this power tool
sensory or mental capabilities, or lack of contains a test charge only and must be fully
experience and knowledge, unless they charged before use.
have been given supervision or instructions First read the safety instructions then follow the
concerning use of the appliance by a person charging instructions. Insert the charging plug
responsible for their safety. (Pic.2) (2.1) into the charging socket on the main
-Children should be supervised to ensure that body of the screwdriver. Plug the charger into a
they do not play with the appliance. standard mains outlet socket.
-Hold the machine by the insulated gripping Do not allow the cable to become knotted or
surfaces where the accessory may contact kinked. The Red LED (Pic.2) (2.2) will illuminate
hidden wiring or the mains cable. If the to indicate charging is in progress.
accessory contacts a ‚live' wire, the exposed This charger and product are specifically
metal parts of the machine can also become designed to work together.
‚live'. Risk of electric shock. DO NOT attempt to charge any other brand of
cordless tool or battery pack with this charger.
Vibration level Note: The charging time is 5-8 hours.
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool a non combustible surface and do not leave
with another and as a preliminary assessment of on charge for more than 8 Hours. Do not
exposure to vibration when using the tool for the
overcharge as this may damage the screwdriver.
applications mentioned
The red LED will go out when the battery is fully
- using the tool for different applications, or with charged.
different or poorly maintained accessories, may Unplug the transformer when not in use and
significantly increase the exposure level store it in a suitable storage cabinet.
- the times when the tool is switched off or when Avoid charging your battery in freezing
it is running but not actually doing the job, may conditions.
significantly reduce the exposure level
Disposal of defective or used batteries
Protect yourself against the effects of vibration Used batteries should not be disposed of in
by maintaining the tool and its accessories, house-hold refuse. In accordance with the
keeping your hands warm, and organizing your
Battery Regulations, you are required to return
work patterns
used or defective batteries to a local business
or a battery collection point. Failure to do so
6
Warning! Charge the screwdriver on
organima lokalne samouprave ili dobavljaču.
IZJAVA O USKLAĐENOSTI:
Pod punom odgovornošću izjavljujemo da
je ovaj proizvod usklađen sa sledećim
standardima: EN 60 745-1,
EN 60 745-2-2, EN 55 014-1, EN 55014-2 u
skladu s uslovima iz direktiva 2006/42/EC,
2004/108/EC, 2006/66/EC, 2002/96/EC,
2002/95/EC.
Tehnički podaci i dokumentacija: IKEA of
Sweden AB, Box 702, Tulpanvägen 8, SE-343 81
Älmhult, SWEDEN.
Potpisnik je odgovoran za usklađenost i tačnost
tehničke dokumentacije i izjavu u ime IKEA of
Sweden AB.
Stefan Sjöstrand
Business Area Manager
IKEA of Sweden AB
55