Operating The Equipment - Sartorius PMA 7501-X Installation Instructions Manual

Operating the Equipment

Turn on the scale using the
Q key (2).
8
After the scale has been
turned on, it will automati-
cally run a self-test.
At the end of this test, 0.0 g
is displayed.
Weighing with One Decimal Place
Place an empty paint can on the weighing pan.
Press the U key (5). The display shows "0.0 g."
Pour in the first component, and read off the weight as
soon as the stability symbol appears; in this case, "g."
Pour in additional components until the desired weight
of your formula is reached.
Remove the filled paint can from the weighing pan.
Never use a hammer to close the lid of a paint can
while it is still on the weighing pan.
Otherwise, you will damage the weighing system.
If a different readout is
displayed, zero or tare the
scale using the U key (5).