Sartorius PMA 7501-X Installation Instructions Manual page 12

Example (cumulative):
1.
Place an empty paint can on
the weighing pan (11).
+ 118.0 g
4.
Press the L key [MEM] (9).
STO 01
7.
Pour in the 3rd component.
+ 203.0 g
Oops!
You poured in too much!
The correct weight for the
formula is 200.0 g.
10.
Press the L key [MEM] (9).
COR 01
13.
Press the L key [MEM] (9)
COR 02
16.
Press the L key [MEM].
The scale will automatically
return to the formulation
program. "C" disappears.
+ 200.0 g.
12
2.
Press the U key (5)
0.0 g
5.
Pour in the 2nd component.
+ 110.0 g
8.
Press the y key (4) to start
the recalculation mode.
A "C" (= correct).
11.
1. Add the first component.
"C1" is displayed. –1.5 g
14.
Add the second compo-
nent. "C2" is displayed.
–2.0 g
17.
To check the prospective
total weight, press the c
key (8) [REC].
"C" = Correction factor; in
this example, 1.02. (Total
formula weight + correc-
tion factor = total weight)
3.
Pour in the first component.
+ 50.0 g
6.
Press the L key [MEM] (9).
STO 02
9.
Press the y key (4) several
times to correct the value to:
+ 200.0 g
12.
Pour in paint until 0.0 g is
displayed.
0.0 g
15.
Pour in paint until the
value 0.0 g is obtained.
0.0 g
18.
Add the fourth component
+1000.0 g
We have come to the end
of our example.