Table of Contents
Advertisement
Contents
General View of the Equipment . . . . . . 2
Intended Use . . . . . . . . . . . . . . . . . . . 3
Warnings and Safety Precautions . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . 6
Operating the Equipment . . . . . . . . . . 8
Applications . . . . . . . . . . . . . . . . . . . . 10
Calibration/Adjustment . . . . . . . . . . . . 13
Menu Settings . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . 19
Care and Maintenance . . . . . . . . . . . . 20
Recycling . . . . . . . . . . . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . . 22
Interface Port . . . . . . . . . . . . . . . . . . . 22
Accessories . . . . . . . . . . . . . . . . . . . . . 23
Declaration of Conformity . . . . . . . . . . 24
Control Drawing . . . . . . . . . . . . . . . . . 30
Verification of Intrinsic Safety . . . . . . . 32
Intended Use
The PMA7501-X (Quality) has been
specially designed for use in the paint-
mixing applications. This scale can be
controlled by a computer connected to
the interface port.
Note:
- Read the installation and operating
instructions carefully before connect-
ing the PMA7501-X and putting it into
operation.
- The application examples and menu
settings described in these installation
instructions are not valid for
PMA7501-X00W.
Warnings and
Safety Precautions
Note:
Improper use or handling can result in
property damage and/or personal injury.
Only qualified personnel may install and
operate the equipment. Make sure you
observe the warning and safety informa-
tion in its entirety during installation
and operation, as well as while perform-
ing maintenance and repair work on the
equipment. The standards, regulations,
occupational safety requirements and
environmental protection laws valid in
your country must be observed. It is
important that all personnel using the
equipment understand this warning and
safety information, and have access to
the relevant documents at all times.
Furthermore, the warning and safety
information supplied with any electrical
equipment connected, such as peripheral
devices, must be observed as well.
The warnings and safety precautions may
have to be supplemented by the equip-
ment operator. All operating personnel
must be informed of any additions to
these instructions. Make sure the equip-
ment is accessible at all times.
General Provisions for Installing the
PMA7501-X
PMA7501-X models meet the require-
ments defined in EC Directive 94/9/EC
for equipment group II, category 2G
and are marked in accordance with the
KEMA05 ATEX1247X EC type-exami-
nation certificate. In addition, they are
approved for hazardous (classified) loca-
tion Class I, Division 1, Groups C,D, and
Class I, Zone 1, Groups IIA and IIB, in the
United States and in Canada, respectively.
Furthermore, PMA7501-X models meet
the EC Directives for electromagnetic
compatibility and electrical safety
(please see the Declaration of Conformity
in these installation instructions.)
3
Hide quick links:
Advertisement
Table of Contents
