Sartorius PMA 7501-X Installation Instructions Manual page 7

Connection to AC Power
The equipment is energized by the power supply
provided. Make sure that the voltage rating printed
on the power supply is identical to your local AC
power rating. When connecting the scale to the
power supply, the laws valid in your country must be
observed. If you should have any questions, please
contact your supplier or Sartorius Customer Service
for information on the legal regulations applicable
in your country. Use only genuine Sartorius power
supplies. The use of power supplies from other
manufacturers, even if these units have a registered
approval rating from a national testing laboratory,
requires the approval of a certified technician.
§ Insert the right-angle plug into the IEC jack (13) on
the scale
§ Plug the power supply into an electrical AC power
outlet
Observe the safety instructions and warnings in this
!
manual
§ Ground the scale.
Connect the cable to the grounding terminal (14).
7