Appendix E
Step 3
SCXI-1180
Breakout Connector
Rear Connector
Ribbon Cable to
Front Panel
Note: If you are using the SCXI-1180 with an SCXI-1351 and an NB5 cable, connect the
SCXI-1180 breakout connector to the female connector on the SCXI-1351. Place the
SCXI-1180 to the left of the SCXI-1351 (looking at the front of the chassis).
© National Instruments Corporation
Threaded Strip in
Rear of Chassis
Breakout Connector
from SCXI-1340
Figure E-3. SCXI-1180 Rear Connections
E-13
SCXI-1163 Cabling
Step 4
Rear
Panel
SCXI-1163 User Manual