Scxi-1343 Rear Screw Terminal Adapter; Table E-6. Scxi-1343 Pin Connections - National Instruments SCXI-1163 User Manual

32-channel isolated digital output module

Hide thumbs Also See for SCXI-1163:

Getting started (158 pages)

Instructions for safe use (4 pages)

Table Of Contents

100

101

102

103

page of 103

/ 103
Contents
Table of Contents
Bookmarks

Table of Contents

Appendix E

4. Connect another ribbon cable to the chassis extender connector in the middle of the

SCXI-1350.

5. Plug the SCXI-1350 into the back of the SCXI module in the first chassis so that the module

rear connector mates with the front connector on the SCXI-1350. When you are connecting

to an SCXI-1163, be sure to set the jumpers for either a DIO-type or an MIO-type board as

appropriate.

6. Screw the rear panel to the threaded strips in the rear of the chassis.

7. Connect the loose end of the ribbon cable from Step 4 into the rear connector of the second

SCXI-1350 and install the adapter board.

8. Continue until all chassis are connected. You do not need to connect anything to the middle

connector of the SCXI-1350 adapter board in the last chassis.