Signal Connections - National Instruments DAQ AT-MIO-16X User Manual

Chapter 2 Configuration and Installation

Signal Connections

Caution:
AT-MIO-16X User Manual
This section describes input and output signal connections to the
AT-MIO-16X board via the AT-MIO-16X I/O connector. This section
also includes specifications and connection instructions for the signals
given on the AT-MIO-16X I/O connector.
Connections that exceed any of the maximum ratings of input or output
signals on the AT-MIO-16X can result in damage to the AT-MIO-16X
board and to the PC. Maximum input ratings for each signal are given in
this chapter under the discussion of that signal. National Instruments is
not liable for any damages resulting from such signal connections.
2-14 © National Instruments Corporation