HP P2000 G3 MSA Reference Manual page 49

412
Warning One disk in the indicated RAID-6 vdisk failed. The vdisk is on line but has a status of FTDN (fault tolerant
with a down disk).
If a dedicated spare or global spare of the proper type and size is present, that spare is used to
automatically reconstruct the vdisk; events 9 and 37 are logged to indicate this. If no usable spare disk is
present, but an available disk of the proper type and size is present and the dynamic spares feature is
enabled, that disk is used to automatically reconstruct the vdisk; event 37 is logged.
Recommended actions
• If no spare is present and the dynamic spares feature is disabled (that is, event 37 is NOT logged),
configure an available disk as a dedicated spare for the vdisk or replace the failed disk and configure
the new disk as a dedicated spare for the vdisk. That spare is used to automatically reconstruct the
vdisk; confirm this by checking that events 9 and 37 are logged.
• Otherwise, reconstruction automatically starts and event 37 is logged. Replace the failed disk and
configure the replacement as a dedicated or global spare for future use.
• If the replacement disk was previously used in another vdisk and has a status of leftover (LEFTOVR),
clear the disk's metadata so you can assign the disk as a spare.
• Confirm that all failed disks have been replaced and that there are sufficient spare disks configured for
future use.
413
Info. Created a replication set with the indicated primary volume.
Recommended actions
• No action is required.
414
Error Failed to create the indicated replication set for the indicated volume.
This operation is not permitted if the specified volume is already in a replication set or is not a master
volume.
Recommended actions
• If the volume is a master volume and is not in a replication set, retry the operation.
415
Info. Deleted the indicated replication set.
Recommended actions
• No action is required.
416
Error Failed to delete the indicated replication set.
This can occur if an invalid identifier was specified for the replication set, or if the specified primary volume
is not on the local system.
Recommended actions
• Repeat the deletion using a valid replication-set identifier, or on the local system for the primary volume.
HP P2000 G3 MSA System Event Descriptions Reference Guide 49