HP P2000 G3 MSA Reference Manual page 37

Hide thumbs Also See for P2000 G3 MSA:
Table of Contents

Advertisement

236
Info.
A special shutdown operation has started. These special shutdown types are used as part of the
firmware-update process.
Recommended actions
No action is required.
237
Info.
A firmware update has started and is in progress. This event provides details of the steps in a
firmware-update operation that may be of interest if you have problems updating firmware.
Recommended actions
No action is required.
238
Warning
An attempt to install a licensed feature failed due to an invalid license.
Recommended actions
Check the license for what is allowed for the platform, make corrections as appropriate, and reinstall. If
the license is invalid, the write will fail.
239
Warning
A timeout occurred while flushing the CompactFlash.
Recommended actions
Restart the Storage Controller that logged this event.
If this event is logged again, shut down the Storage Controller, remove the controller module from the
enclosure, replace the CompactFlash card (which is accessible from the rear of the controller module,
as shown in your product's User Guide), and reinstall the controller module.
If this event is then logged again, replace the controller module.
240
Warning
A failure occurred while flushing the CompactFlash.
Recommended actions
Restart the Storage Controller that logged this event.
If this event is logged again, shut down the Storage Controller, remove the controller module from the
enclosure, replace the CompactFlash card (which is accessible from the rear of the controller module,
as shown in your product's User Guide), and reinstall the controller module.
If this event is then logged again, replace the controller module.
241
Info.
The auto-write-through trigger event that caused event 242 to be logged has been resolved.
Recommended actions
No action is required.
HP P2000 G3 MSA System Event Descriptions Reference Guide
37

Advertisement

Table of Contents
loading

Table of Contents