Husqvarna WR 300 Workshop Manual page 264

REBOUND ADJUSTMENT
8
The extension (or rebound) damping adjustment can be made by acting on the
adjustment screw ( R ) you can see on the upper cap of both legs.
39
6
To modify the rebound braking adjustment, always start from the "fully
closed" position (the screw is fully turned clockwise). Each screw position can
be recognized by a "click".
• When turning the adjuster ( R ) clockwise, using a proper spanner, you will increase
the rebound hydraulic damping, making the fork slower during the rebound phase.
• When turning the adjuster ( R ) counterclockwise, using a proper spanner,
you will decrease the rebound hydraulic damping, making the fork more responsive
during the rebound phase.
WARNING
Do not force the adjustment screw (R) past its limits.
40
COMPRESSION ADJUSTMENT
The compression damping adjustment can be made by acting on the adjustment
screw ( C ) you can see at the bottom of both fork legs.
42
33
To modify the compression braking adjustment, always start from the "fully
34
closed" position (the screw is fully turned clockwise). Each screw position can
45
41 44
be recognized by a "click".
46
49
• Remove the plastic cap
4
• When turning the adjuster ( C ) clockwise, using a proper spanner, you will increase
the compression hydraulic damping, reducing the travel made by the fork, under the
same stress.
• When turning the adjuster ( C ) counterclockwise, using a proper spanner, you will
decrease the compression hydraulic damping, making the fork softer against
Sospensione anteriore (TE-SMR)
La sospensione anteriore è una MARZOCCHI "U.S.D." teleidraulica a steli rovesciati e perno avanzato; steli di diametro 50 mm . ground harshness.
L'escursione della ruota sull'asse delle gambe è di 300 mm (TE) e 250 mm (SMR).
WARNING
Do not force the adjustment screw (C) past its limits.
• Put the plastic cap back to its seat.
STANDARD ADJUSTMENTS
Compression: 12 clicks
Extension: 12 clicks
I.50
TELAIO, SOSPENSIONI E RUOTE
FRAME, SUSPENSIONS AND WHEELS
CHASSIS, SUSPENSIONS ET ROUES
RAHMEN, AUFHAENGUNG UND RAEDER
BASTIDOR, SUSPENSIONES Y RUEDAS
53
54
48
55
28
27
22
29
30
7
61
31
32 58
8
13
9
33
34 10
35
36 11
37
12
38
14
26
15
16
17
18
3
8
39
1
2
19
2
40
20
40
21
25
TE
8000H1605 (07-09)
5
R
SMR
C