Programming A Relay Broadcast Initiation - Muratec F-98 Operating Instructions Manual

Beyond the basics
7
There's a choice to make. Instruct your fax to carry out this delayed command
in one of the following ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2: Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 (i. e.,
00), and then the time when the fax could perform the command:
Delayed
Enter Time: 00/17:05
8
Press , .
ENTER ENTER
9
The now displays the next programmable one-touch key.
LCD
If you do not want to enter or change any other key's programming, press
to return your machine to its usual standby mode.
If you do want to enter or change this key's programming, go back to step 3.
If you want to enter or change another key's programming, go back to step 2.

Programming a relay broadcast initiation

Note: To erase a programmable one-touch key, refer to page 2.41.
Note: For this operation to work, three things must be true:
• The remote fax machine must be a Muratec fax machine with "hub"
capability.
• The call group(s) you are faxing must exist on the remote machine.
• You must know the two-digit number for each call group you're faxing.
To program a relay broadcast initiation into a programmable one-touch key:
2.36
on the 30th.")
PM
today.")
PM
STOP
1
Press , , 1, . The
PROGRAM C ENTER
Select Program No.
P1:No Number Stored
... or indicates a command already is programmed into this key.
If 1 is the key you want to program, skip to step 3. (However, our examples
P
from here will say " 5" rather than "
P
2
Select the key in which you want to program a command or change a previ-
ously stored command and then press it. Here, we've selected
Select Program No.
P5:No Number Stored
3
If you change your mind and wish to select a different programmable one-
touch key, go back to step 2 before going on to step 4.
4
Press . The now shows either
ENTER LCD
P5:Fax Number
_
5
Use the numeric keypad to enter the "hub" machine's number exactly as your
machine should dial it, including whatever codes your phone system may
require. The number can be up to 40 characters in length:
P5:Fax Number
9-5550629
Your display can show only 20 characters at a time. To view characters beyond
those 20 (such as with an international long-distance number), press
scroll leftward or to scroll rightward.
Important: Do not press
ENTER
Note: If you make a mistake or want to erase characters entered in a previ-
ous setting, press
CANCEL
just one character in the number, press
or to move it rightward, to that character and press
erase it. Then re-enter until the number is just as you want it.
6
Now, while you still can see the fax number on the
two times and then press
ENTER
Relay Tx
Group No. _
either shows:
LCD
1.")
P
5.
P
P5:Fax Number
or
9-5558743
.
to erase leftward. Or, if you want to change
to move the cursor leftward,
CANCEL
, press -
LCD COM OPTIONS
. The shows:
LCD
to
to