Table of Contents
Advertisement
Beyond the basics
Getting everything just the way you want it
The EasyStart feature guided you through the "just-gotta" settings on your machine.
In the next few pages, we'll cover other settings.
Setting up for scans
You can set parameters regarding how your fax machine scans documents for either
faxing or copying:
• Primary transmission mode — Gives you four ways to send faxes, either one
of the three resolution modes — normal, fine or superfine ("S Fine" on the
— or in grayscale mode ("Gray").
• Primary contrast mode — Sets how light or dark you want faxed documents
to be when they arrive at their destinations.
1
Press
,
, 0, 1,
PROGRAM
J
ENTER
Primary:
Normal
Program/Enter
If the setting you see is acceptable, skip to step 3.
Otherwise, proceed to step 2.
2
To change the setting, press
appears. In this example, we've chosen fine resolution.
Primary:
Fine
Program/Enter
3
Press
to save the setting. The
ENTER
Contrast:
Normal
Program/Enter
If the setting you see is acceptable, skip to step 5.
Otherwise, proceed to step 4.
2.2
. The
asks which resolution you select:
LCD
repeatedly until your chosen mode
PROGRAM
asks which contrast setting you select:
LCD
4
To change the setting, press
appears. In this example, we've chosen light contrast.
Contrast:
Program/Enter
5
Press
to save the setting.
ENTER
Of course, you always can change the resolution and contrast before sending.
)
LCD
To adjust the resolution and contrast:
• Press
RESOLUTION
• Press
to change the contrast.
CONTRAST
repeatedly until your chosen setting
PROGRAM
Light
to change the resolution.
Advertisement
Table of Contents
