F-Code Transmission And Polling - Muratec F-98 Operating Instructions Manual

Beyond the basics
4
Use the numeric keypad to enter your F-Code box's four-digit
Here we've entered 2345:
03:Print F-Code Doc.
Enter I.D. Code:2345
5
Press .
ENTER
• If you've entered the correct
ments in — and then erase them from — the F-Code box.
• If you've entered an incorrect
print the document.

F-Code transmission and polling

With F-Code, your machine can send secure transmissions to, and perform polling
from Muratec fax machines as well as other manufacturers' machines.
You may accomplish such transmissions in either of two ways:
• Programmable one-touch key (see pages 2.34-2.41)
• Direct entry of the - sub-address and password, which is what we will now
ITU T
describe.
Whether you are sending to or polling from another machine, you have to know the
correct sub-address on the receiving machine, as well as the password if that sub-
address has one.
Note: For F-Code communication to work, three things must be true:
• The remote fax machine must support
word) capabilities.
• A mailbox with an
ITU
doesn't need to have a password.)
• You must know the
for the mailbox on the remote machine.
F-Code transmission
1
Insert the document.
2
Adjust the resolution and contrast if necessary.
3
If you want to toggle between transmission from the feeder and transmission
from memory, press
MEMORY TRANSMIT
2.32
. . code, your fax machine will print all docu-
I D
. . code, your fax machine will refuse to
I D
- sub-addressing (and pass-
ITU T
- sub-address must exist on the remote fax. (It
T
- sub-address and password (if any) information
ITU T
.
4
. . code. Press
I D
Enter Sub-Address
_
5
Use the numeric keypad to enter the appropriate sub-address in the remote
machine. In this example, we've entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press
6
Press
Enter Password
_
Note: If you know that this sub-address does not have a password, skip to
7
Use the numeric keypad to enter the appropriate password. In this example,
we've entered 654321.
Enter Password
654321_
Note: If you make a mistake, press
8
Press
Enter Fax Number
_
9
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
10
What you do now depends upon when you wish the transmission to begin.
• To have it begin now, skip to step 13.
• To delay it, proceed to step 11.
11
Press
Delayed
Enter Time: 15/17:05
- four times and then press
COM OPTIONS
CANCEL
rect number.
. The will show:
ENTER LCD
step 8.
CANCEL
rect number.
. The will show:
ENTER LCD
- , . The will show:
COM OPTIONS ENTER LCD
.
ENTER
to back up, then enter the cor-
to back up, then enter the cor-
.
START