Table of Contents
Advertisement
13
— Begins a manual fax transmission or reception.
START
14
— Press this key to make one copy, or multiple copies of a document.
COPY
15
— An all-purpose "Whoa!" key. Stops the current operation, ejects a doc-
STOP
ument from the document feeder and cancels alarms.
16
— Lets you quickly disconnect a call and go right to the next one with-
FLASH
out having to hang up the handset.
17
— Press this key to set the machine to stamp each page of the original
STAMP
document automatically when the machine transmits it. The
next to this key glows when this operation is activated.
18
— Press this key to turn on (or off) the confirmation report feature for
REPORT
the next fax transmission. If the
your machine will print the confirmation report for the next fax transmission
only. Otherwise, your machine will disable the printing.
19
— Much as
is a "Whoa!" key,
ENTER
STOP
user settings, begins operations and moves through command levels.
20
— Press this key to delete characters on the
CANCEL
mands you have entered into the machine.
21
— The right arrow button scrolls (moves) through features and command
options displayed on the
.
LCD
22
/
— During on-hook dialing, it turns the monitor speaker off or
MONITOR
CALL
on. When it's on, it allows you to hear the call you're making. When using this
feature, you can only hear the communication taking place. You cannot be
heard unless you are using a handset (optional). When you're sending a fax,
this key also activates the call request feature.
23
— The left arrow button scrolls through features and command options
displayed on the
.
LCD
24
-
— Chooses from among five fax options: delayed transmission,
COM
OPTIONS
relay broadcast, polling, F-code transmission or F-code polling.
25
— Any function can be started by first pressing this key and then
PROGRAM
entering the function number.
26
— Helps you send a broadcast fax (sending the same document to
BROADCAST
more than one location).
27
— When a document is in the document feeder, press this key to
CONTRAST
toggle among normal, dark or light contrast settings.
28
— When a document is in the document feeder, press this key to
RESOLUTION
toggle among the three resolution modes and the halftone (grayscale) mode.
STAMP
light next to this key is glowing,
REPORT
is a "Go!" key. It confirms
ENTER
and cancel com-
LCD
You're in control!
We've worked hard to make sure your fax machine is easy for you to use. Let's make
sure there's no confusion about how to operate it. Below are simple operating tips:
To press: 0 (zero), 1, 2, 3, 4, 5, 6, 7, 8, 9, # or *
Use:
The numeric keypad.
Tip:
At no other time within this manual will we refer to the letters printed
below the numeric keys and their uses (such as accessing abc by pressing
the 2 key.) These letters are there only for your convenience in using your
fax machine as a telephone.
light
To press:
,
,
,
A
B
C
Use:
The one-touch key by that name.
Tip:
Please don't confuse the zero (0) with the letter
Here's an example. If we say "press
... and then, finally
Important: Although our example above includes commas, do not enter them into
the fax machine. Those characters appear in our instructions to sepa-
rate one number from the other, and are not intended for actual entry
by using your control panel.
commas, but there is a special way to enter them. We will explain this
process when the time comes.
or any other letter key
D
, 7,
PROGRAM
ENTER
... you'd press
PROGRAM
... then 7
... then
ENTER
... then 0 (the numeric key zero)
... then 8
ENTER
There is a function (broadcasting) which requires the entry of
Getting started
.
O
, 0, 8,
" ...
ENTER
1.5
Advertisement
Table of Contents
