Printing A Document Received In An F -Code Box; F -Code Transmission And Polling; F -Code Transmission - Muratec F-65 Operating Instructions Manual

Printing a document received in an
When your machine receives a document via
machine, your machine will print a message alerting the person for whom the docu-
ment is intended. Then the person has a certain number of days in which to print
out the message before your machine erases it. (see step 13, on page 2.23)
Note: For this operation to work, two things must be true:
•You must know the -code box's two-digit number.
F
•You must know the four-digit
To print a received message from an
1
Press , , 3. The display shows:
PROGRAM E
Print F-Code Doc
2
Press .
ENTER
01:Bookkeeping
If this box holds the document you want to print, skip to step 4.
If not, go on to step 3.
3
Use the numeric keypad to enter the two-digit number (01-10) of the
box currently "holding" the document you want to print. We enter 03.
03:Muratec Offic
4
Press . The display will show:
ENTER
I.D. Code : ****
Note: If the -code box is holding no documents at this time, the
F
this briefly before returning to step 3:
No Doc. Stored
In step 3, be sure to select an
document.
5
Use the numeric keypad to enter your
Here we enter 2345:
I.D. Code :2345
6
Press .
ENTER
• If you enter the correct . . code, your fax machine will print all documents
I D
in this -code box and then erase them.
F
• If you enter an incorrect .
I D
document.
-code box
F
- sub-addressing from another fax
ITU T
. . code for the -code box.
I D F
-code box:
F
-code box that is holding at least one
F
-code's four-digit . . code.
F I D
. code, your fax machine will refuse to print the
-code transmission and polling
F
With -code, your machine can send secure transmissions to other manufacturers'
F
machines, and perform polling from other makers' machines, as well. You can do
this in one of two ways:
• Press a programmable one-touch key programmed for sub-address sending. (See
"Programmable one-touch key," on pages 2.32-2.35)
. . . or . . .
• Enter the
ITU
describe.
Note: For -code communication to occur, three things must be true:
F
• The remote fax machine must support
word) capabilities.
• A mailbox (
fax. (It does not have to have an
doesn't have not at least one box with a subaddress,
will be impossible.
• You must know the
tion for the mailbox (
-code
F
-code transmission
F
Sending a document with
1
Insert the document. Adjust resolution and contrast if necessary.
2
Press
COM
shows
LCD
5.F-Code Tx
3
Press
ENTER
Enter SubAddress
then it will show:
_
4
Use the numeric keypad to enter the appropriate subaddress number.
In this example, we enter 123456.
123456_
5
Press
ENTER
- subaddress and password directly, which is what we will now
T
-
ITU
-code box) with an - subaddress must exist on the remote
F ITU T
- password.) If the other machine
ITU T
- subaddress and (if applicable) password informa-
ITU T
-code box) on the remote machine.
F
- subaddress / password
ITU T
- five times.
OPTIONS
. The shows briefly:
LCD
. The shows briefly:
LCD
Beyond the basics
sub-addressing (and pass-
T
-code communication
F
2.25