What Do The Keys Do - Muratec F-65 Operating Instructions Manual

Getting started

What do the keys do?

Important: Some of the functions we'll mention, here, are covered in the "Beyond
the basics" section, which begins on page 2.1.
1
Liquid crystal display (
shows the machine's status and lets you see what you're entering during vari-
ous operations. (If the
LCD
2
- — Use this key to choose from among six fax options:
COM OPTIONS
Broadcast, delayed transmission, relay broadcast initiation, polling, F-code
transmission or F-code polling.
3
and — Use these keys to scroll through features and command options
as displayed on the .
LCD
1.4
) — The display (1-line 16-character) which
LCD
is blank, the machine is off.)
4
— Press this key and enter a function number to access your
PROGRAM
machine's programs.
5
light — If glowing, indicates your fax machine is receiving
MEMORY RECEIVE
an incoming fax document into the machine's electronic memory.
6
— is a "Go!" key. When pressed, it confirms user settings,
ENTER ENTER
begins operations and moves through command levels.
— When a document is in the document feeder, press this key to
RESOLUTION
toggle among the three resolution modes and the halftone (grayscale) mode.
When neither the - , nor
S FINE FINE
glowing, your machine is set for normal resolution.
(light-emitting diode) is
HALFTONE LED