Table of Contents
Advertisement
Just in case ...
Errors
Your machine occasionally experiences communications errors, which may be caused
by anything from lightning to telephone line interference. The fax machine at the
other end of the line can also cause communication errors.
Trying your call may be all that's necessary. However, if the problem persists regu-
larly, call your local telephone company for help. If that call does not help and the
problem persists regularly, call your authorized Muratec dealer.
Error reports
When an error occurs, your fax machine prints an error report. Each fax error
report lists an error message which includes:
• A possible solution to the problem
• The sending location (if the remote fax stores a Location
• The result — which is a special error code.
• A sample of the document's first page.
Kinds of error codes
The error code listed in the "Result" column of the error report indicates the specific
problem encountered:
• "
" codes — Occur while dialing
D
• "
" codes — Occur during reception
R
• "
" codes — Occur during transmission
T
3.6
Specific errors
Some of the error codes you may see on an error report:
Dialing errors
.0.3,
D
D.0.2
D.0.6, D.0.7 Either the remote fax unit did not respond, the call did not go through
Reception errors
of its own)
ID
.1.1
R
.1.2
R
.1.4
R
.2.3
R
.3.1
R
.3.3
R
.3.4
R
.4.2
R
.4.4
R
.5.1,
R
.0.8
The remote unit did not respond, the call could not be completed or
D
was pressed while the unit was dialing.
STOP
Try the call again. If your machine repeats the message, call the
remote fax user to verify that the unit is operating properly.
The remote fax machine is busy. Call again.
or someone pressed
while the calling fax machine was dialing.
STOP
Call again.
The calling fax machine did not respond to your fax machine. This can
happen if someone dials a wrong number or if the remote machine
restricts access through use of a passcode.
The two fax machines were incompatible. Your fax machine sends and
receives only
-
Group 3 fax communication, the industry standard
ITU
T
since the early 1980s.
Someone pressed
at the receiving fax machine.
STOP
Poor phone line conditions made fax communication impossible.
Call someone at the remote machine.
The sending fax machine detected too many errors from the receiving
fax machine.
The sending fax machine is incompatible or had a document feeder
problem during transmission.
Poor phone line conditions may have prevented your fax machine
from properly printing some or all of the pages it received.
Either the line disconnected before transmission or the transmitting
fax machine needs maintenance.
The fax machine has reached its memory capacity.
.5.2
reception failed.
R
ECM
Advertisement
Table of Contents
