Table of Contents
Advertisement
Keeping things secure
Your machine's security features can help you keep private fax documents private,
avoid unwanted outside communication and even protect against unauthorized use
of your machine.
The key to it all: the passcode
Your machine has a protection passcode system which is central to the machine's
security features. If you set the passcode to anything besides 0000, this passcode pro-
vides access to many other security features.
To set your machine's passcode:
1
Decide upon the four-digit passcode (0001–9999) you want to use. Write the
passcode down, and put it in a safe place.
Important: Do not use 0000. This turns off passcode protection.
2
Press
,
, 1, 5.
PROGRAM
J
Protect Passcode
3
Press
.
ENTER
OldPasscode: ****
4
If you are creating the passcode, use the numeric keypad to enter 0000.
If you are modifying an existing passcode, enter the existing passcode.
5
Press
.
ENTER
6
Enter the desired four-digit passcode. Here, we enter 6296:
NewPasscode:6296
7
Press
to save the passcode.
ENTER
Note: Anytime you want to turn off the passcode, repeat steps 1–7 and enter 0000
in step 6.
Operation protection
Important: For this feature to work, you must have set the passcode, as described
in the left column.
When operation protection is activated on your machine, only users who enter the
proper passcode (see "The key to it all: the password," left column) can use it.
Activating operation protection
1
Press
,
, 1, 6.
PROGRAM
J
Set Opr. Protect
2
Press
. The
shows:
ENTER
LCD
Passcode
: ****
3
Use the numeric keypad to enter the passcode. Here, we enter 6296:
Passcode
:6296
4
Press
. The
shows:
ENTER
LCD
Opr.Protect :Off
5
If the setting you see is acceptable, skip to step 7.
If not, go on to step 6.
6
To change the setting, press
appears. In this example, we chose "On."
Opr. Protect:On
7
Press
to save the setting.
ENTER
Beyond the basics
or
once or twice until the setting you want
2.37
Advertisement
Table of Contents
